SCUBA DIVERSIONS, "The Friendly Dive Store", is A FULL-SERVICE PROFESSIONAL DIVE STORE located in Central
Florida, and serving the scuba diving community world wide since 1984.
We are dedicated to providing you with the best in scuba diving Equipment, Service, Support, Gas fills, Rentals, and
certainly the Highest Quality Instruction, always at the Lowest Prices. We are a full service repair facility. With very few
exceptions, all of our repairs are done in-house. We offer professional service on most major brands of diving equipment.
REPAIR PRICING: (All labor prices are plus parts)
This price includes complete disassembly (where required), ultrasonic cleaning, replacement of any
worn or damaged parts, and reassembly and adjustment to manufacturer's specifications.
REGULATOR (FIRST STAGE & SECOND STAGE): $40.00
REGULATOR WITH OCTOPUS (FIRST STAGE, 2 SECOND STAGES: $60.00
TANK CYLINDER INSPECTION: Includes valve removal and inside inspection.
TANK VISUAL INSPECTION: $5.00 (STEEL)
TANK VISUAL INSPECTION: $5.00 (ALUMINUM)
(inspection for neck cracks is conducted on all aluminum cylinders)
CYLINDER HYDROSTATIC TESTING (INCLUDES VISUAL INSPECTION):
(visual inspection certification is also included in the hydrostat test price)
— Bring your tanks to a professional dive store for filling and for regular
Visual Inspection is required for dive tanks once a year, which includes
removing the tank valve and conducting an internal inspection of the tank for signs of corrosion, contamination, or moisture. If the cylinder is found to be free of contamination or signicant corrosion a Visual Inspection sticker is affixed to the cylinder. This inspection is valid for 12 months from time of inspection.
Hydrostatic testing is required for dive tanks every five years
(by Federal Law), which determines
the tank's ability to safely contain gas fills, under very high pressure. A certified hydro test facility will stamp the
shoulder of the tank below the valve with the date of hydrostat testing.
We provide both air and nitrox fills to certified divers, with gas fills ranging from air to 100% O2.
GAS FILL PRICES: Based on 80 cu tank size.
COMPRESSED AIR: $5.00 (80 cubic foot cylinder, fill price varies by size)
NITROX: to 40% $10.00 (80 cubic foot cylinder, fill price varies by size)
OUR FILLING METHOD is a continued commitment to our customer service. There is a difference!
We provide all of our gas fills for dive tank cylinders in a refrigerated water bath. Why? Because significant heat is
generated when cylinders are filled, and the end result is that you end up with less pressure in the tank after
it cools down. Complete immersion in a water bath draws this heat away at a significant rate (25 times faster than an air
environment, as you may remember from your scuba diving class). The colder the water is, the more efficient the heat transfer.
This not only reduces the time necessary to obtain a full pressure gas fill, it also means that you will have a greater volume
of air or gas in your tank.
Heat that is generated during the filling process - will cause a significant pressure drop once the cylinder cools to room
temperature, and to diving water temperature. This means you will have a smaller volume of available gas in the event of an
emergency. By having a cold, full pressure gas fill, you will have a greater volume of gas for longer dive times, or greater safety.
In recent years many dive stores have gone to dry, hot filling. This is based on published information which says it is not
necessary to cool the cylinder. In reality though, to obtain a cool, full pressure gas fill, the cylinder must be filled
extremely slow to avoid heating - or it must be allowed to cool to room temperature from the heat that is generated and then
topped off to full pressure. Either way, this will take an inordinate amount of time.
DON'T BE FOOLED. The principles of physics cannot be altered. Any cylinder that is filled in an air environment is going to
heat excessively. This heating will result in a substantial loss of pressure as the cylinder cools to ambient temperature.
When you have a cylinder filled, it should be at rated pressure and at the very least cool, if not cold to the touch. Anything
less is unacceptable. The practice of dry, hot filling is actually a decreased level of service. To not ensure a cold, fully
rated pressure fill is simply a lack of commitment to customer service.
We offer only the best in scuba diving rental equipment. All of the rental equipment that we offer at Scuba
Diversions is first-class, and high-performance diving equipment. We offer for rental
either Zeagle or Mares regulators. All of our regulator systems have Cochran
Commander computers. All of our buoyancy compensators are weight integrated. The BCD that we use for rental is
the Zeagle Tec BC. We also offer, Henderson Full Core combo wet suits (farmer John and
jacket style). Both Ntrox and air tanks are available for rental.
REGULATOR (with nitrox computer): $25.00
BUOYANCY COMPENSATOR: $20.00
WET SUIT: $15.00 (2 piece core warmer and fullsuit)
AIR TANK (Al 80): $8.00
NITROX TANK (Al 80): $12.00
WEIGHTS (to 16 lbs.): $4.00
EQUIPMENT BAG (required): $2.00
* Be sure to bring your Diver Certification card with you when diving or renting equipment.